Product Test

Merida Big.Nine 20-D (Silk Medium Blue/Silver/Yellow)

EMI Icon EMI Options Available Get this for as low as Rs. per month

THIS IS WHAT WE DO

Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship 'Made in Taiwan'.

MULTIPLE FRAME OPTIONS

Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

BIG.NINE/SEVEN SPEED N FRAME

6061 series double butted and technoformed aluminium. Redesigner in 2019 using a new tube set with a more modern design. Comes equipped with inboard disc mounts, as well as F, C and K-mounts.

SIZE SPECIFIC WHEELS

Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

DROPPER POST READY

All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

MODERN HARDTAIL GEOMETRY

Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

 

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

 

FRAMESET

FRAME BIG.NINE SPEED N
material: aluminium
29" wheelsize
135x9mm axle standard
BSA bottom bracket standard

SUSPENSION

FORK SR Suntour XCM HLO
Coil
100mm suspension travel
lockout
SHOCK N/A

DRIVETRAIN

BOTTOM BRACKET FSA TH-7420ST-W, Cartridge Bearing
CHAIN KMC M700
CRANKSET Shimano TY301
42-34-24 teeth
170 mm-S, 175 mm-M/XXL
SHIFT LEVERS Shimano ST-EF505
FRONT DERAILLEUR Shimano FD-TY700
CASSETTE Sunrace CSM668
11-32 teeth
8 speed
REAR DERAILLEUR Shimano RD-M360

COCKPIT

GRIP/TAPE MERIDA EC
HANDLEBAR MERIDA CC
material: aluminium
690mm width
15mm rise
STEM MERIDA CC
material: aluminium
31.8mm diameter
6° stem angle
70 mm-S, 80 mm-M, 90 mm-L, 100 mm-XL, 110 mm-XXL
SADDLE MERIDA Sport comfort
SEATPOST MERIDA CC
material: aluminium
30.9mm diameter
15mm setback

BRAKES

FRONT BRAKE Shimano ST-EF505
BR-MT200 brake caliper
REAR BRAKE Shimano ST-EF505
BR-MT200 brake caliper

WHEELS & TIRES

FRONT WHEEL Rim - MERIDA CC
17mm inner width
material: aluminium
Hub - Shimano TX505
100x9mm width front hub
32 spoke holes
Centerlock
REAR WHEEL Rim - MERIDA CC
17mm inner width
material: aluminium
Hub - Shimano TX505
135x9mm width rear hub
32 spoke holes
Centerlock
FRONT TIRE MERIDA K1080
29x2.2"
wire
REAR TIRE MERIDA K1080
29x2.2"
wire

ACCESSORIES

PEDAL VP VPE-891

EMI is offered on Credit Cards from the following card issuing banks 
- American Express
- Axis Bank
- HDFC Bank
- ICICI Bank 
- IndusInd Bank
- Kotak Mahindra Bank
- RBL Bank
- Standard Chartered Bank
- Yes Bank
The option to select an EMI is available after you checkout and choose a card based payment mode.

Fore More Info on EMI Payments Click here

We all love to ride our bikes, and we know how exciting it is to get a new bike.
Our READY TO RIDE Service ensures you can ride your bike within a few minutes upon receiving it.

NO MECHANIC REQUIRED

Building a bike to ride smoothly and safely requires specialty tools and expertise. Trained and experienced bike mechanics assemble your bike with precision and care in a professional bike shop environment using correct bicycle specific tools and procedures.

We review your new bike to ensure there are no missing parts and that they all work together as desired - derailleurs shifting perfectly, brakes performing flawlessly, and that your wheels are trued to perfection. Our mechanics complete a thorough 30 point checklist to assure that your new bike is not only perfectly tuned, but that every nut and bolt is torqued to exact technical specifications. This is the same quality control process that we use for the thousands of bicycles that roll out of our bike shop to ensure they are high performing and are safe to ride.

Every bike is then carefully packed and ready to be shipped out using the best shipping companies in the country.

BOX TO RIDING IN 10 MINUTES

When you receive your new bike all you need to do is complete a simple 10 minute process and you are Ready to Ride. It actually takes longer to remove the foam padding that safely protects your bike than to do the final easy assembly steps.

After removing your bike from the box and removing the foam padding, you only have to tighten the pedals and handlebars, install the seat and plug in the front wheel and you'll be riding in 10 minutes.

Proven to work even with the most mechanically un-inclined person.

Mountain Bikes are bikes that are designed to be ridden off-road on trails, mud tracks, rocky/sandy sections and generally areas which are not smooth. Generally, mountain bikes are identified by knobby tires, flat handlebars, and suspensions which provide a smooth and stable ride even on highly irregular or broken terrain.. read more

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)