Muc-off Ultimate Tubeless Setup Kit
Muc-off Ultimate Tubeless Setup Kit
Muc-off Ultimate Tubeless Setup Kit
Muc-off Ultimate Tubeless Setup Kit

Muc-off Ultimate Tubeless Setup Kit


Regular priceRs. 4,300
Tax included.


Estimated Shipping Widget will be displayed here! (with custom color)


A kit complete with every essential needed to join the tubeless revolution. Five different kits for all kinds of bikes. Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. 


Going tubeless? Our Ultimate Tubeless Setup Kit is a one-stop-shop for everything you'll need to make the switch. Just make sure you've got tubeless-ready wheels and tyres

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.

  • Everything you need in one simple kit

  • Say goodbye to carrying spare tubes!

  • Check our how-to featuring the Deakinator


Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.


Kits available for road, gravel and CX to enduro, trail and downhill.

How to
  1. Remove all old rim strips or tape and clean the rim.

  2. Make sure the rim is clean and dry before applying the tape.

  3. Get the tape from the packet and line it up from the opposite side of the valve.

  4. Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.

  5. Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.

  6. Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)

  7. Overlap the tape by roughly 10 – 15cm

  8. Leave a small amount unstuck so that you can cut the remainder off

  9. Once cut sketch and pull the tape down to create a seal

  10. Go around the rim with your thumb to make sure there are no air pockets or messed areas.

  11. Once you are happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve

  12. Grab your tubeless valve and remove the lock ring and o ring

  13. Chose the right rubber fitment for your rim tape and insert the valve into the rim

  14. Refit O-ring and Lockring making sure you lock the valve in (don’t go too tight or could damage the rubber)

  15. Re-fit your tire of choice careful not to damage the tape (by using tire levers etc)

  16. Inflate tire to create a fit (should hear some popping around the rim)

  17. Release Air and remove valve core using the spare valve cap

  18. Grab the sealant pouch and give it a shake

  19. Unscrew the cap and fit on the valve in an upright position

  20. While holding the pouch spin the wheel down so that the pouch is now upside down

  21. Insert the sealant by rolling the pouch down

  22. Spin wheel back upright and remove the pouch

  23. Reinsert valve core and inflate to your pressure

Our kit options:
  • Road (21MM TAPE / 44MM VALVES)

  • Road (21MM TAPE / 60MM VALVES)

  • XC/Gravel (25MM TAPE / 44MM VALVES)

  • DH/Trail/Enduro (30MM TAPE / 44MM VALVES)


What's included:
  • 1x 10m roll of Tubeless Rim Tape

  • 2x Seal Patches

  • 2x Black Tubeless Valves

  • 2x Valve caps

  • 2x Locking nuts

  • 1x Valve core removal tool (doubles as a spare valve cap)

  • 3 x Pairs of rubber bases for size choice

  • 2x Pouches of No Puncture Hassle Tubeless Sealant


We love happy customers. Our 7-day Easy Returns Policy is a basic structure to support you effectively. If you need any further assistance, just reach out and we're happy to help.

To be eligible for a Return, please make sure of the following
- Products must be unused, unwashed and in re-sellable condition
- Products must be in their original condition with all original tags, manuals, and packaging intact
- Packaging should not be broken, opened or tampered with
- You need to have a receipt or proof of purchase
- All promotional items shipped along with the purchased item must be returned

Once approved, equivalent store credit will be issued which can be used to purchase other products online at

The following product categories cannot be Returned or Exchanged - Bicycles, Trainers, Wheels, Rims, Floor Pumps, Frame sets, Forks/Suspensions, Work Stands, Tool Kits, Car Racks, Triathlon Suits, Socks, Masks, Nutrition items, Bike Cases/Bags and Sunglasses.

Do check our detailed Returns & Exchanges Policy for more information.

Customer Reviews

No reviews yet