Merida Speeder 100 III1 (City Rose/Gun Metal Grey)
4711256495330
An entry point into the Speeder range for riders who want a wide, easy gear range for climbing, with just enough componentry to make daily commuting and hilly rides manageable.
Overview
The Speeder 100 III1 is the accessible end of Merida's Speeder line, built around the same lightweight aluminium frame and full carbon fork as the rest of the range, paired here with a Shimano Altus 3x8 triple drivetrain that trades outright simplicity for a genuinely wide gear spread.
A triple chainring up front (48-38-28T) means there's always a low enough gear for a steep ramp, even fully loaded, while Shimano MT200 hydraulic disc brakes handle stopping power confidently in any weather. The tubeless-ready Merida Comp SL wheelset is shared with the rest of the Speeder line, so there's room to upgrade down the line.
It's a practical first "fast" bike for riders who want road-bike speed on a budget, without giving up an easy gear for the hills.
Why You'll Like It
A genuinely wide gear range — the Shimano Altus 3x8 triple chainring setup gives you an easy gear for steep climbs and a proper top gear for flat, fast stretches.
The carbon fork does the heavy lifting — the Speeder CF2 fork noticeably reduces road vibration compared to an all-aluminium hybrid.
Hydraulic disc brakes as standard — not cable-actuated discs, which means more consistent, lower-effort braking in the wet.
A frame and fork that don't hold the bike back — the same lightweight SPEEDER LITE III aluminium frame and carbon fork used across the whole Speeder range.
Room to grow — the tubeless-ready wheelset means you can upgrade to tubeless tyres later without a new wheel purchase.
Who Is It For?
The Speeder 100 III1 is built for someone stepping up from a basic city bike who wants a genuinely wide, forgiving gear range alongside the speed of a proper flat-bar road bike — a strong first "proper" hybrid for commutes that include real climbs.
For riders managing daily traffic, inconsistent road surfaces, and the occasional steep section, the carbon fork and triple-chainring gearing bring a level of comfort and climbing ease that's genuinely noticeable over a typical single- or double-ring hybrid at this price.
Good to Know
- A triple chainring needs slightly more attention when shifting under load — easing off the pedals briefly during a front shift keeps it smooth.
- The tubeless-ready rims mean you can switch to tubeless tyres later for lower rolling resistance and fewer punctures, without swapping the wheelset.
- Regular chain cleaning will keep the 3x8 drivetrain shifting smoothly, especially if you're commuting through dusty or wet conditions.
Technical Specifications
- Frame: SPEEDER LITE III material: aluminium 700x35C max. wheelsize 100x9/135x9mm axle standard BSA bottom bracket standard
- Fork: MERIDA SPEEDER CF2 Tapered material: carbon 700x35C max. wheelsize
- Shock: N/A - rigid fork
- Bottom Bracket: FSA TH-7420ST Cartridge Bearing
- Chain: Sunrace CN-M84
- Crank: Shimano TY301 48-38-28 teeth 170 mm (all sizes)
- Shift Levers: Shimano Altus SL-M315
- Cassette: Sunrace CSM558 11-32 teeth 8 speed
- Front Derailleur: Shimano TY601
- Rear Derailleur: Shimano Acera-Altus 8S
- Grip/Tape: MERIDA Comp EC
- Handlebar: MERIDA COMP TK material: aluminium 600mm width Flat
- Stem: MERIDA COMP CC material: aluminium 31.8mm diameter 7 degree stem angle 80 mm-XXS/XS, 90 mm-S, 100 mm-M, 110 mm-L/XL
- Saddle: MERIDA COMP SL 28% recycled material V-mount
- Seatpost: MERIDA COMP CC 30.9mm diameter 5mm setback material: aluminium
- Front Brake: Shimano MT200 2 piston
- Rear Brake: Shimano MT200 2 piston
- Front Wheel: MERIDA COMP SL 17mm inner width 22mm height material: aluminium Tubeless ready, Shimano HB-QC300 100x9mm width 32 spoke holes centerlock
- Rear Wheel: MERIDA COMP SL 17mm inner width 22mm height material: aluminium Tubeless ready, Shimano FH-QC300-HM 135x9mm width 32 spoke holes centerlock
- Front Tire: Maxxis Detonator 700x32C wire
- Rear Tire: Maxxis Detonator 700x32C wire
- Pedal: VP VPE-891
Additional Info
- Country of Origin: Taiwan
- Imported By: Extreme Adventure Sports , Gat No. 399 , Milkat , 2289 , Nagar Rd , Sai Satyam Park , Wagholi , Lonikand , Pune - 412207 , Maharashtra , India.
- Net Quantity: 1N
- Customer Care Address: 291, 10 Main, 5 Block, Jayanagar, Bangalore - 560041. Ph: (080)47183232, Email: support@bumsonthesaddle.com
- Commodity: Bicycles
- Warranty
Merida Bicycles are covered by the following warranty terms ensuring freedom from defects in materials and workmanship.Models from 2011 onwards are covered by the following warranty
*Note: A products lifetime is considered as 15 years.
Frameset:
- Our frames are covered by a Lifetime Warranty for the entire ownership of the original purchaser. Exclusions apply. This applies to manufacturing and material defects and includes bikes used for racing
- A rider and equipment weight limit of 120kg applies; 140kg for performance and hybrid eBikes.
- Category 5 models carry a 5 year warranty
Forks: Carbon and aluminium rigid forks are guaranteed for 5 years from the date of purchase.
- Merida branded components, including paint and finish, are guaranteed for 1 year from the date of purchase.
- Bikes used for Racing are excluded.
All other original parts shall be covered exclusively by the stated warranty of their original manufacturer
- Misuse or Negligence: The warranty does not cover damages resulting from misuse, abuse, or negligent handling of the products, including but not limited to improper installation, disassembly, or modification.
- Unauthorized Repairs or Alterations: Any attempt to repair or alterations by individuals or service providers not authorized by the manufacturer will void the warranty.
- Natural Wear and Tear: Normal wear and tear, including cosmetic deterioration, scratches, dents and fading over time, are excluded from the warranty coverage.
- Accidents or External Forces: Damages caused by accidents, improper packing, collisions, unauthorized tampering or exposure to extreme external forces (e.g., impacts, falls, or severe weather conditions) are not covered under this warranty.
- Incompatible Use: The warranty does not extend to damages resulting from using the products in ways inconsistent with their intended purpose or specifications.
- Failure to Follow Instructions: Damages arising from a failure to follow the product's operating instructions, guidelines, or recommended practices as outlined in the user manual are not covered.
- Battery Exclusions: For products with rechargeable Lithium-ion batteries, the warranty may exclude battery degradation over time or failures caused by non-compliance with proper charging procedures.
- Third-Party Accessories: Damages caused by the use of third-party accessories, components, or modifications not explicitly approved by the manufacturer are not covered.
- Failure to Provide Proof of Purchase: Warranty claims may require proof of purchase, and failure to provide such documentation may result in the exclusion of the product from warranty coverage.
- Exclusion for Water Damage: Any damage relating to damage caused by water because some products are water repellant but not Water Proof
- Non-specified conditions: Not includes damaged caused to products by improper accessories or improper fittings or for use in non specified conditions
- The warranty is available only to the Original purchaser/buyer of products
- Service must be performed by Brand or an authorized reseller.
- Insurance, handling and transportation charges to Brand Distributor shall be borne by Customer.
- For some products registration is required to extend the warranty. Failure to register voids extended warranty
- The decision to replace or repair a product is influenced by the brand and various factors