Muc-off Inner Tube Sealant
20216
🚚 Delivery Estimated between 08 December and 13 December.
Description
No Puncture Hassle Inner Tube Sealant is easy-to-install and seal holes in inner tubes ensuring that your ride is uninterrupted!
SEE IT IN ACTION
No Puncture Hassle Inner Tube Sealant brings the puncture protection of tubeless to inner tubes.
Inner Tube Sealant brings the puncture protection of tubeless to inner tubes.
Laugh in the face of punctures with our super lightweight but badass inner tube sealant! The Music-Off No Puncture Hassle Inner Tube Sealant is easy-to-install and the cutting edge molecules seal holes in tubes of up to 4mm ensuring that your ride is uninterrupted! Our proprietary water-based non-hazardous formula was developed specifically for use with inner tubes and is compatible with a wide range of bikes. Whether you’re commuting, out on a backpacking adventure, hitting the trails, and everything in between, we have you covered!
Suitable for inner tubes with Schrader Valves and Presta Valves with removable valve core only. Not suitable for tubeless tires.
Features
-
Seals holes up to 3-4mm
-
Compatible with both Presta (with removable core) and Schrader valves
-
Puncture prevention for inner tubes
-
Suitable for MTB, road, eBikes, commuter, urban, folding & touring
-
Seals holes in tubes up to 4mm
-
Works on multiple punctures
-
Does not dry out
-
Lasts the life of the inner tube
-
Contains anti-corrosion inhibitors
-
Contains cutting-edge molecules to help seal holes quickly and effectively
-
Water-soluble
-
Non-Hazardous
-
Works in temperatures from -15°C to +50°C
PREVENTS PUNCTURES ON INNER TUBES
Works on regular inner tubes, tubeless tyres and rims not required!
SEALS HOLES UP TO 4MM
Does not dry out and lasts the life of the inner tube.
How to
For inner tubes using a Schrader Valve:
-
Remove the dust cap from your valve and deflate the air from your tyre then spin your wheel so your valve is in the 9 and 12 o’clock position.
-
Turn and pull up the plastic tube from the top of the bottle.
-
Remove the black valve core remover tool from the top of the tube then remove your valve core from the valve stem. (Insert a two-pronged tool into the top of the Schrader valve and unscrew anti-clockwise to extract the core. Keep your valve core safe whilst filling!)
-
Now fit the end of the filling tube onto the valve stem and with the bottle upside down, squeeze gently on the bottle to dispense the desired amount of sealant into the valve. Ensure sealant flows smoothly into the valve. (Fill the recommended amount for your inner tube using the dosage scale on the side of the bottle).
-
Remove the filling tube from the valve and wipe away any sealant residue.
-
Re-install valve core using the tool and tighten clockwise until tight then inflate the tyre to the desired pressure in accordance with your manufacturer’s recommendations.
-
Give your wheel a spin and you're good to go!
For inner tubes using a Presta Valve:
-
If you are filling No Puncture Hassle Inner tube sealant into a Presta valve you must first check if you have a removable valve core. (Not all Presta valve cores are removable).
-
You can check your Presta valve has a removable core by identifying if the sides of the valve core have a flat edge. Presta valves with a non-removable core will not have flat edges.
-
If it does have flat edges you can remove the core by using a Presta valve core remover tool or a set of thin nose pliers to remove the core by unscrewing anti-clockwise until it comes loose out of the valve stem. Keep your valve core safe whilst filling!
-
Now fit the end of the filling tube onto the valve stem and spin your wheel so that your valve is at the 6 o’clock position. With the bottle upside down, squeeze gently on the bottle to dispense desired amount of sealant into the valve. Ensure sealant flows smoothly into the valve. (Fill the recommended amount for your inner tube using the dosage scale on the side of the bottle).
-
Remove the filling tube from the valve and wipe away any sealant residue.
-
Re-install valve core using the tool and tighten clockwise until tight then inflate the tyre to the desired pressure in accordance with your manufacturer’s recommendations.
-
Give your wheel a spin and you're good to go!
What's included
-
Inner tube sealant
-
Valve core removal
-
2 x O-ring
-
No Hassle Puncture Sticker
-
PLEASE NOTE: 1L size does not include valve core removal, O-rings & Sticker
Specification
| Recommended use | Road, MTB |
| Size available | 300ml |
| Sealant life | - |
We love happy customers. Our 30-day Easy Return's Policy is a basic structure to support you effectively.
Do check our detailed Return Policy for more information.
Note: The following product categories cannot be Returned or Exchanged - Bicycles, Trainers, Wheels, Rims, Floor Pumps, Frame sets, Forks/Suspensions, Work Stands, Tool Kits, Car Racks, Triathlon Suits, Socks, Masks, Nutrition items, Bike Cases/Bags and Sunglasses.