Muc-off Ultimate Tubeless Setup Kit
20137
Estimated Shipping Widget will be displayed here!
A kit complete with every essential needed to join the tubeless revolution. Five different kits for all kinds of bikes. Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.
SEE IT IN ACTION
Going tubeless? Our Ultimate Tubeless Setup Kit is a one-stop-shop for everything you'll need to make the switch. Just make sure you've got tubeless-ready wheels and tyres
The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.
Features
-
Everything you need in one simple kit
-
Say goodbye to carrying spare tubes!
-
Check our how-to featuring the Deakinator
EVERYTHING NEEDED TO GET SET UP AND READY TO ROLL
Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.
WIDE RANGE OF SIZES AVAILABLE
Kits available for road, gravel and CX to enduro, trail and downhill.
How to
-
Remove all old rim strips or tape and clean the rim.
-
Make sure the rim is clean and dry before applying the tape.
-
Get the tape from the packet and line it up from the opposite side of the valve.
-
Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.
-
Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.
-
Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)
-
Overlap the tape by roughly 10 – 15cm
-
Leave a small amount unstuck so that you can cut the remainder off
-
Once cut sketch and pull the tape down to create a seal
-
Go around the rim with your thumb to make sure there are no air pockets or messed areas.
-
Once you are happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve
-
Grab your tubeless valve and remove the lock ring and o ring
-
Chose the right rubber fitment for your rim tape and insert the valve into the rim
-
Refit O-ring and Lockring making sure you lock the valve in (don’t go too tight or could damage the rubber)
-
Re-fit your tire of choice careful not to damage the tape (by using tire levers etc)
-
Inflate tire to create a fit (should hear some popping around the rim)
-
Release Air and remove valve core using the spare valve cap
-
Grab the sealant pouch and give it a shake
-
Unscrew the cap and fit on the valve in an upright position
-
While holding the pouch spin the wheel down so that the pouch is now upside down
-
Insert the sealant by rolling the pouch down
-
Spin wheel back upright and remove the pouch
-
Reinsert valve core and inflate to your pressure
Our kit options:
-
Road (21MM TAPE / 44MM VALVES)
-
Road (21MM TAPE / 60MM VALVES)
-
XC/Gravel (25MM TAPE / 44MM VALVES)
-
DH/Trail/Enduro (30MM TAPE / 44MM VALVES)
-
DH/PLUS (25MM TAPE / 44MM VALVES)
What's included:
-
1x 10m roll of Tubeless Rim Tape
-
2x Seal Patches
-
2x Black Tubeless Valves
-
2x Valve caps
-
2x Locking nuts
-
1x Valve core removal tool (doubles as a spare valve cap)
-
3 x Pairs of rubber bases for size choice
-
2x Pouches of No Puncture Hassle Tubeless Sealant
Additional Info
- Country of Origin: China
- Imported By: Aetos Sports LLP , 115 , Maker Chambers V , Nariman Point , Mumbai - 400021 , Maharashtra , India.
- Net Quantity: 1N
- Customer Care Address: 291, 10 Main, 5 Block, Jayanagar, Bangalore - 560041. Ph: (080)47183232, Email: support@bumsonthesaddle.com
- Commodity: Tubeless Kits