NiteRider Mako 150 Front Light (Black)
NR-5066
Safety and visibility shouldn't be limited by budget — the entry point into NiteRider's Mako series, simple to use and easy on battery changes.
Overview
The Mako 150 is a straightforward, battery-powered headlight putting out up to 150 lumens across High, Low, and Flash modes. Side "gills" in the housing add extra visibility from an angle, not just head-on, and the light runs on 2 included AA alkaline batteries — no charging cable to carry, just twist the light head to swap batteries when they run low.
It mounts with an easy on/off handlebar strap and quick-release tab, and is rated IP64 for water and dust resistance. Like the rest of the Mako line, it's tested to FL1 standards for accurate lumen output, runtime, and resistance claims.
Why You'll Like It
No charging required
Runs on 2 AA batteries — swap them anywhere, no USB cable or outlet needed.
Long runtime on Flash mode
Up to 72 hours on Flash, so you're not changing batteries every few rides.
Side visibility "gills"
Extra light spill to the sides helps you register with traffic approaching from an angle.
FL1-tested claims
Lumen output, runtime, and water/dust resistance are independently benchmarked, not just marketing numbers.
Who Is It For?
This suits budget-conscious commuters and casual riders who want a simple, no-fuss headlight — battery-powered rather than rechargeable, so there's nothing to remember to charge before a ride.
Good to Know
Battery life varies significantly by mode: High (150 lumens) runs about 18 hours, Low (75 lumens) stretches to roughly 23 hours, and Flash extends all the way to 72 hours — pick the mode that suits your ride length to avoid unnecessary battery swaps.
Technical Specifications
- Max Brightness: 150 Lumens
- Power Source: Disposable AA Battery (2x AA included)
- Mount Location: Handlebar (strap mount)
- Run Time: Low 75lm – 23:00h, High 150lm – 18:00h, Flash – 72:00h
- Protection Rating: IP64
- Weight: 175g
Additional Info
- Country of Origin: China
- Imported By: Happy Earth Enterprises LLP , 3/8 Ground Floor , Opp. MG Infant School , Bilekahalli , Bengaluru - 560076 , India.
- Net Quantity: 1N
- Customer Care Address: 291, 10 Main, 5 Block, Jayanagar, Bangalore - 560041. Ph: (080)47183232, Email: support@bumsonthesaddle.com
- Commodity: Front Lights
- Warranty
Niterider Lights are covered by a warranty ensuring freedom from defects in materials and workmanship for Limited** Lifetime.
*Note: A products lifetime is considered as 15 years.
**Duration of Warranty
• Limited lifetime warranty: Covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs.
• 2-year warranty: Printed circuit boards, switches and AC adapters
• 1-year Warranty: Rechargeable battery cells
- Misuse or Negligence: The warranty does not cover damages resulting from misuse, abuse, or negligent handling of the products, including but not limited to improper installation, disassembly, or modification.
- Unauthorized Repairs or Alterations: Any attempt to repair or alterations by individuals or service providers not authorized by the manufacturer will void the warranty.
- Natural Wear and Tear: Normal wear and tear, including cosmetic deterioration, scratches, dents and fading over time, are excluded from the warranty coverage.
- Accidents or External Forces: Damages caused by accidents, improper packing, collisions, unauthorized tampering or exposure to extreme external forces (e.g., impacts, falls, or severe weather conditions) are not covered under this warranty.
- Incompatible Use: The warranty does not extend to damages resulting from using the products in ways inconsistent with their intended purpose or specifications.
- Failure to Follow Instructions: Damages arising from a failure to follow the product's operating instructions, guidelines, or recommended practices as outlined in the user manual are not covered.
- Battery Exclusions: For products with rechargeable Lithium-ion batteries, the warranty may exclude battery degradation over time or failures caused by non-compliance with proper charging procedures.
- Third-Party Accessories: Damages caused by the use of third-party accessories, components, or modifications not explicitly approved by the manufacturer are not covered.
- Failure to Provide Proof of Purchase: Warranty claims may require proof of purchase, and failure to provide such documentation may result in the exclusion of the product from warranty coverage.
- Exclusion for Water Damage: Any damage relating to damage caused by water because some products are water repellant but not Water Proof
- Non-specified conditions: Not includes damaged caused to products by improper accessories or improper fittings or for use in non specified conditions
- The warranty is available only to the Original purchaser/buyer of products
- Service must be performed by Brand or an authorized reseller.
- Insurance, handling and transportation charges to Brand Distributor shall be borne by Customer.
- For some products registration is required to extend the warranty. Failure to register voids extended warranty
- The decision to replace or repair a product is influenced by the brand and various factors